欢迎来到北京豫维科技有限公司网站!

热门关键词:苏玛罐,原子吸收分光光度计,环境监测产品,液相色谱,色谱柱。

产品中心您现在的位置:首页 > 产品展示 > 通用色谱配件 > 抑制器 > Dionex CRS 500 化学再生抑制器 085090

Dionex CRS 500 化学再生抑制器 085090

更新时间:2019-11-11

简要描述:

Dionex CRS 500 化学再生抑制器 085090
是化学再生的抑制,因此具有非常低的噪声和快速的启动时间。

  免费咨询:010-61755520

  发邮件给我们:yuweichina86@163.com

Dionex CRS 500 化学再生抑制器 085090

高容量,溶剂兼容,化学,再生的抑制
Thermo Scienfitic 戴安CRS500抑制器是化学再生的抑制,因此具有非常低的噪声和快速的启动时间。随着新的化学位移再生(DCR)套件,这款经典抑制器提供更方便的操作。该戴安CRS 500抑制优势包括:

高容量,能够处理样品复杂基质溶剂兼容设计
非常低的信号与噪声和优异的基线稳定性
低方法检测限
快速启动和平衡
使用方便,免维护的DCR套件操作
对改进的性能提高峰值效率,特别是当加上4微米基于柱改进的热稳定性,以消除因损坏安装故障装运期间,处理和操作的戴安CRS 500抑制器具有高容量,并且可以与所有热Scienfitic戴安离子交换柱中使用。对于低噪声和长寿命,戴安CRS 500抑制器建议使用含HPLC溶剂洗脱液阴离子和阳离子分离。该戴安CRS 500抑制在这两个2 - 4毫米格式提供; 3毫米列应该有2mM抑制器使用。

该戴安CRS 500抑制产生噪声低,因为它使用非电解化学再生。低噪音转化为更低的方法检出限。

 

 

Dionex CRS 500 化学再生抑制器

订货信息:

Dionex CRS 500 化学再生抑制器 085090

ACRS 500   Suppressor 4 mm085090
ACRS 500 Suppressor 2 mm085091
CCRS 500 Suppressor 4 mm085092
CCRS 500 Suppressor 2 mm085093

 

 

High-Capacity, Solvent-Compatible, Chemically-Regenerated Suppressor

The Thermo Scienfitic Dionex CRS 500 suppressor is a chemically-regenerated suppressor and therefore has very low noise and quick startup time. With the new Displacement Chemical Regeneration (DCR) Kit, this classic suppressor provides easier operation. The Dionex CRS 500 suppressor advantages include:

  • High-capacity and solvent-compatible design capable of handling samples with complex matrices

  • Very low signal-to-noise and excellent baseline stability

  • Low method detection limits

  • Fast start-up and equilibration

  • Easy to use, maintenance-free operation with the DCR kit

  • Improved peak efficiency for improved performance, particularly when coupled with 4 μm based columns

  • Improved thermal stability to eliminate installation failures due to damage during shipment, handling, and operation

The Dionex CRS 500 suppressor has high capacity and can be used with all Thermo Scienfitic Dionex ion-exchange columns. For lowest noise and longest life, the Dionex CRS 500 suppressor is recommended for anion and cation separations using eluents containing HPLC solvents. The Dionex CRS 500 suppressor is available in both 2- and 4 mm formats; 3 mm columns should be used with 2 mm suppressors.

The Dionex CRS 500 suppressor produces the lowest noise because it uses non-electrolytic chemical regeneration. Low noise levels translate into lower method detection limits.

Chemically Regenerated Suppressor (CRS 500)  Specifications
ACRS 500
Physical Specifications
Dimensions (l × w × d)14.0 × 4.5 × 4.8 cm (5.5 × 1.8 × 1.9 in.)
Weight370 g (0.82 lb)
Void volume4 mm: <50 μL
2 mm: <15 μL
Chemical Specifications
Temperature Range115–40° C
Recommended Backpressure30-100 psi
Maximum Eluent Flow Rate3 mL/min (4 mm)
0.75 mL/min (2 mm)
Eluent Solvent Restrictions2100% solvent compatible
Maximum Regenerant EWM3 Flow Rate10 mL/min (4 mm)
5 mL/min (2 mm)
Modes of Operation SupportedChemical, DCR Mode
Maximum Currentn/a
 
CCRS 500
Physical Specifications
Dimensions (l × w × d)14.0 × 4.5 × 4.8 cm (5.5 × 1.8 × 1.9 in.)
Weight370 g (0.82 lb)
Void volume4 mm: <50 μL
2 mm: <15 μL
Chemical Specifications
Temperature Range115–40° C
Recommended Backpressure30-100 psi
Maximum Eluent Flow Rate3 mL/min (4 mm)
0.75 mL/min (2 mm)
Eluent Solvent Restrictions2100% solvent compatible
Maximum Regenerant EWM3 Flow Rate10 mL/min (4 mm)
5 mL/min (2 mm)
Modes of Operation SupportedChemical, DCR Mode
Maximum Currentn/a

1When installed outside the heated column enclosure, all suppressors can support applications up to 60 ?C.
2Solvents for anion eluents include methanol. Solvents for cation eluents include acetonitrile and dioxane.
3EWM = external water mode; for eluents containing > 40% solvent, use the chemical regeneration mode.

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7