欢迎来到北京豫维科技有限公司网站!

热门关键词:苏玛罐,原子吸收分光光度计,环境监测产品,液相色谱,色谱柱。

产品中心您现在的位置:首页 > 产品展示 > 通用色谱配件 > 行业专用色谱柱 > Dionex CarboPac SA10碳水化合物色谱柱

Dionex CarboPac SA10碳水化合物色谱柱

更新时间:2019-11-14

简要描述:

Dionex CarboPac SA10碳水化合物色谱柱
这些离子交换柱提供单的快速,高效分离和双糖不影响分辨率。

  免费咨询:010-61755520

  发邮件给我们:yuweichina86@163.com

Dionex CarboPac SA10碳水化合物色谱柱

对于生物燃料和食品样品中单糖的快速色谱分析,使用的Thermo Scientific戴安CARBOPACSA10分析及保护柱。这些离子交换柱提供单的快速,高效分离和双糖不影响分辨率。在只有10分钟或不到10分钟的8种常见的生物燃料的单糖和双糖分析食品中的六种常见的糖。

 

Dionex CarboPac SA10碳水化合物色谱柱

订货信息:

Dionex CarboPac SA10 碳水化合物分析柱

分析柱
CarboPac SA10 Analytical Column (4 x 250mm)074641
Dionex CarboPac SA10 Analytical Column (2 x 250 mm)082322
保护柱
CarboPac SA10 Guard Column (4 x 50mm)074902
Dionex CarboPac SA10 Guard Column (2 x 50 mm)082323

 

 

 

CarboPac SA10 Column for Fast, High-Resolution Mono- and Disaccharide Analysis

The Thermo Scientific Dionex CarboPac SA10 column line has been expanded to include a new 2 × 250 mm microbore column. This microbore column complements the already available standard-bore Dionex CarboPac SA10 (4 × 250 mm) Column. The new 2 mm format is optimally suitable for interfacing with Mass Spectrometric Detectors, as well as Pulsed Amperometric Detectors.

The Dionex CarboPac SA10 anion-exchange column is designed for fast chromatographic analysis of simple sugars in biofuel and food samples. The fast, efficient separations of mono- and disaccharides are achieved without compromising resolution. The Dionex CarboPac SA10 column can analyze six common sugars in food samples in only 10 min, or eight common biofuel mono- and disaccharides in less than 10 min. 

  • Fast analysis

  • High resolution

  • High capacity

  • High reproducibility

  • No derivatization required

The Dionex CarboPac SA10 column is composed of a unique macroporous substrate coated with a strong anion-exchange layer of latex nano beads which provides high capacity and rapid high-resolution separations. The excellent resolution and linearity of this column provides highly accurate, quantitative carbohydrate analysis. Used in conjunction with pulsed amperometric detection (PAD) systems, the Dionex CarboPac SA10 column provides direct quantification of nonderivatized carbohydrates with minimal sample preparation or cleanup, and is capable of separating a wide range of sample concentrations. This column features high reproducibility, and can withstand thousands of injection cycles under high pH conditions.

CarboPac SA10 Column for Monosaccharide and Disaccharide Analysis Specifications
DimensionsCarboPac SA10 Analytical Column:
4 × 250 mm and 2 × 250 mm
CarboPac SA10 Guard Column:
4 × 50 mm and 2 × 50 mm
Maximum operating pressure3500 psi (24.5 MPa)
Temperature range4–60 °C
Typical operating conditions1700 psi at 1.5 mL/min (standard-bore column) or 0.38 mL/min (microbore column)
Recommended flow rate: 1.5 mL/min (standard-bore) or 0.38 mL/min (microbore)
Typical Eluents Potassium hydroxide or sodium hydroxide
Resin composition6-μm diameter substrate (ethylvinylbenzene 55% crosslinked with divinylbenzene) agglomerated with 55-nm MicroBead difunctional quaternary ammonium ion (4.5% cross-linked).
Anion-exchange capacity

Approximately 290 μeq/column (4 × 250 mm standard-bore column)

Approximately 73 μeq/column (2 × 250 mm microbore column)

Column constructionPEEK

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7